Prince

Tour XR 15L (1.35)

Polyester Gauge 15L 1.36 mm In production

Lab measurements for Prince Tour XR 15L (1.35), ranked against all 791 strings in the database. Every figure below is a testing-machine result at a fixed reference tension, not a playtest opinion.

Measured values

Stiffness

213lb/in

lower = softer, kinder on the arm

Tension loss

49%

lower = stays where you strung it

Energy return

82%

higher = livelier, more free power

Spin potential

6.7

higher = more spin off the string bed

Ball bite

0.488COF

higher = grabs the ball harder

String friction

0.073COF

lower = strings slide and snap back

How it ranks against all 791 strings

Stiffness 213 lb/in · 82nd pct

Stiffer than 82% of strings tested.

Tension loss 49 % · 86th pct

Sheds more tension than 86% of strings tested.

Energy return 82 % · 6th pct

Livelier than 6% of strings tested — very muted and low-powered.

Spin potential 6.7 · 88th pct

More spin potential than 88% of strings tested.

Ball bite 0.488 COF · 73rd pct

Grips the ball harder than 73% of strings tested.

String friction 0.073 COF · 9th pct

More string-on-string friction than 9% of strings tested — slides and snaps back freely.

Like Tour XR 15L (1.35), but…

Almost nobody looks a string up out of curiosity. You are here because something about your current setup is wrong. Each list below keeps the rest of this string's profile as close as it can while moving decisively on the one thing you picked, so these are swaps rather than merely different strings.

What Tour XR 15L (1.35) is actually good for

Its standing on each of the site's rankings, out of every measured string in the database. Same arithmetic as the finder, not a separate opinion.

How long it lasts, and how far it stretches

Playable life

~14hours

Estimated from tension loss, on a scale running from 40 hours for the best-holding strings in the database down to 10 for the worst. At four hours a week that is about 4 weeks.

Estimated, not measured. This estimates when the bed goes dead, not when the string snaps. If you break strings before you notice them going dull, you are a breaker, and thickness and material matter far more to you than tension hold does.

Track this in a setup

Elongation under load

0.03.77.511.240 lb51 lb62 lb8.5%10.0%9.4%Pulled toStretch (%)
This stringDatabase median

How far the string stretches when tensioned to a given load. A string that elongates more absorbs more of the impact itself and feels softer; one that barely moves passes more of it on to the frame and the arm.

Measured at every tension and swing speed

The figures at the top of this page come from one test condition: 51 lb at fast swing speed. There are one in total, and all of them are below. Tension moves the bed more than the choice between two similar strings does, so this is the table that actually answers "what will it feel like for me".

Stiffness lb/in lower = softer, kinder on the arm

Strung at Fast swing
51 lb 23.1 kg 213

Tension loss % lower = stays where you strung it

Strung at Fast swing
51 lb 23.1 kg 49

Energy return % higher = livelier, more free power

Strung at Fast swing
51 lb 23.1 kg 82

The highlighted cell is the condition every other figure on this site is quoted at.

What else the machine recorded

Further measurements from the same test, given at the reference condition of 51 lb, fast swing.

Dwell time

35.7ms

How long the ball stays on the string bed. Longer dwell is the physical basis of what players call hold or pocketing.

Bed deflection

32.3mm

How far the string bed moves at impact. More deflection means the bed is doing more of the work of stopping the ball.

Peak force

33lb

The highest force perpendicular to the string bed during impact. The spike the frame and the arm actually receive.

Tension at impact

26.5lb

What the bed is actually pulled to by the time the ball arrives, after it has settled. Always lower than the tension it was strung at.

Loss: settling

6.6lb

Tension lost simply from being strung and left alone, before a ball is hit.

Loss: bedding in

17.6lb

Tension lost while the bed settles over its first impacts.

Loss: impact

0.4lb

Tension lost to the impact itself. Frequently negative, because a bed often gains tension across an impact rather than losing it.

Loss: total

24.7lb

The three losses above added together, in pounds.

Strings that play like this

Closest matches across stiffness, tension loss, energy return and spin potential.

Head to head: Tour XR 15L (1.35) vs Revolution 16 · Tour XR 15L (1.35) vs Hawk Power 17 (1.25) · Tour XR 15L (1.35) vs Super Smash 17 (1.25)

More from Prince

What these numbers mean

Stiffness · lb/in

How much the string bed resists deflection. Higher plays firmer and more controlled; lower plays softer and easier on the arm.

Tension loss · %

Share of the reference tension the string sheds under a fixed test protocol. Lower means the bed stays where you strung it for longer.

Energy return · %

Share of impact energy handed back to the ball. Higher plays livelier and more powerful.

Spin potential

Ball friction divided by string-on-string friction. Higher means better bite with a cleaner snapback, so more spin.

Ball bite · COF

String-on-ball friction. Higher grabs the ball harder through the brush.

String friction · COF

String-on-string friction. Lower lets the mains slide and snap back into place after impact.

Compare Tour XR 15L (1.35) against 791 strings Switching from this? Convert your tension Use it in a hybrid Find it on the map Find the right string for me